Remember the plumb bob may be a useful guide if you’re not sure on a subtle slope but it’s not a given, and it also won’t help you determine if the putt is up or downhill. If it appears to the left of the cup, the slope should take the ball from left to right. If the shaft appears to the right of the cup, the slope you are on should take the ball from right to left. If the shaft also covers the hole, the putt should be straight – the ground you are standing on should be level. Hold the putter up, as described above between thumb and forefinger, towards the end of the grip if you can, covering the ball with the shaft. Stand about 10 feet or so behind the ball (maybe further back for longer putts) so you are looking directly through the ball to the hole in a straight line. You need to gain a good understanding of how the plumb bob method works before you put it into practice on the course, so you should spend some time on the putting green learning the process. This is very important as it’s how you must hold your putter each time in order to have a true vertical line when plumb bobbing – It won’t work otherwise. Look where the putter head is positioned and remember that. Twist the putter round between thumb and forefinger to find the point where shaft and the chosen vertical are level. Find a known vertical, like the edge of a building, and hold the putter up so you can compare the vertical with the shaft lean. It likely won’t do that automatically as the shaft will generally not go into the very centre of the head meaning there will be some tilting. Ma-at is usually depicted next to the typical Ancient Egyptian scale with two unequal weights, therefore requiring balancing by the plumb bob. In order to plumb bob effectively, you have to check the shaft of your putter hangs absolutely vertically when you hold it lightly between thumb and forefinger on the grip.
0 Comments
Leave a Reply. |